EN
AR
FR
DE
HI
JA
KO
PL
PT
RU
ES
TL
ID
VI
TH
FA
12V 13.3A Rainproof Outdoor LED Lighting Power Supply CX-400-24
This product is a high-efficiency and high-reliability switching power supply for outdoor rainproof type. This product adopts stable and reliable circuit design, using high-quality components, after strict quality inspection and 100% full load aging screening, low failure rate, long life.
This product has output overload protection, over-current protection and short circuit protection; it can protect your loads and connecting wires from the risk of overheating and burning.Place of Origin: CHINA Brand Name: Hangtepower Model Number: CX-400-24
Detailed introduction
Description
This product is a high-efficiency and high-reliability switching power supply for outdoor rainproof type. This product adopts stable and reliable circuit design, using high-quality components, after strict quality inspection and 100% full load aging screening, low failure rate, long life.
This product has output overload protection, over-current protection and short circuit protection; it can protect your loads and connecting wires from the risk of overheating and burning.
- 1. Three years of research and development and 20, 000 hours of production evaluation in their own factory to achieve the stable and reliable quality performance.
- 2. With the latest technology and production process, it is the most advanced honeycomb equipment with the highest production capacity and the lowest loss in the world. The maximum cutting speed can reach 700 cuts/min.
- 3. Fully computerized control. Improve equipment control details high automation, more convenient operation.
- 4. It’s dust-free, tasteless, pollution-free, and complies with international environmental protection requirements
Specifications
| Input Electrical Characteristics | |||
| Input Voltage Range | 180VAC | - | 264VAC |
| Rated Input Voltage | 200VAC | - | 240VAC |
| Input Frequency | 47 Hz | 50 Hz | 63Hz |
| Input Current | - | - | 5A |
| Inrush Current | - | - | 50A |
| Efficiency | 86% | - | - |
| Power Factor | - | - | - |
| No load power | 6W | ||
| Output Electrical Characteristics | |||
| Rated Output Voltage | V1: +24.0Vdc | 20.0V | 24.7V |
| Output Voltage Adjust Range | -- | - | - |
| Rated Output Current Range | 0～13.3A | 0A | 13.3A |
| Voltage Accuracy ① | 20.0V | 24.7V | |
| Load Regulation ① | - | - | |
| Temp. coefficient ① | ±0.03%/℃ | - | - |
| Set Voltage Range | -- | - | - |
| Overshoot (turn on) | ≤5.0% | - | 5% |
| Start-up Time ④ | 3Sec. | - | 3Sec. |
| Ripple & Noise (mVp-p) | ≤500mV @220Vac，Full Load | ||
| Dynamic Load | 10%-100%Load: ≤±1200mV | 10%-50%Load: ≤±500mV | 50%-100%Load: ≤±500mV |
| Capacitor load | at least 3000uF | ||
| Working Environment | |||
| Operating ambient | -40℃-70℃ | ||
| Start up @-40℃ | -40℃, 220Vac input, warm up for 5 minutes, 26.7A with load, can start. | ||
| Storage ambient | -40℃-85℃ | ||
| operating humidity | 20%RH-90%RH | ||
| Storage humidity | 10%RH-95%RH | ||
| Heat-dissipating | Fan cooling, need to be close to the customer's metal chassis shell cooling | ||
| Atmospheric pressure | 70-106KPa | ||
| Max Altitude | 3000m | ||
| DC Output Protection | |||
| Over Voltage Protection | - | Over Voltage Protection | - |
| Short Circuit Protection | Auto recover from short circuit protection | Short Circuit Protection | Auto recover from short circuit protection |
| Over Current Protection | 27~40A Automatic resumption of work after elimination of faults | Over Current Protection | 27~40A Automatic resumption of work after elimination of faults |
| Outline and Terminals | |||
| Dimension | L 192±1mm*W 116±1mm*H 48±1mm | ||
| Weight | 445g | ||
| Input terminal Output terminal | 9.5mm-9P pitch terminal, L N FG V- V- V- V+ V+ V+ | ||
| Dimension | L 192±1mm*W 116±1mm*H 48±1mm | ||
| Signal terminal | - | ||
Applications
Outdoor LED Lighting projects
Quick Detail
24V 3.2A, 75W, Industrial Control Equipment Switch Power Supply
● Derating curve:
● Derating Curve of Power Output with Input Voltage :
● Mechanical drawing:
● Installation Notes:
Note:! For the threaded mounting holes at the bottom of the power supply, unless otherwise specified, screws of appropriate length should be used; otherwise, the screws may penetrate too deeply, causing short-circuit damage to the internal components of the power supply!
▲Requirement: The length of the customer's screws into the power supply housing should be less than 4mm
● Use instructions:
1、Please follow the installation instructions when use the power supply.
2、Before power on test run after installation, please check and proofread the wiring on each terminal, make sure that the input and output, AC and DC, positive and negative, voltage and current values are correct, prevent the occurrence of wrong connection, and avoid damaging the power supply and user equipment.
3、Before power on, please use a multi meter to measure whether the live wire, zero wire and ground wire are short circuited, and whether the output terminal is short circuited; it is better to start without load when power on.
4、Do not exceed the nominal value of the power supply when using, so as not to affect the reliability of the product. If you need to change the output parameters of the power supply, please consult our technical department before using.
5、In order to ensure the safety of use and reduce interference, please ensure that the grounding terminal is reliably grounded（ground wire please thicker than AWG18#）.
6、If the power supply fails, please do not repair it without permission. Please contact our customer service department as soon as possible, customer service line：
● Transportation & Storage instructions
1、Transport：
The package is suitable for shipping by automobiles, ships, airs, trains, etc. During transportation, it shall be rain proof, loaded and unloaded gently.
2、Storage：
When the product is not in use, it shall be placed in the packing box. The storage environment temperature and relative humidity shall meet the requirements of the product. No corrosive gas or product in the warehouse, and no strong mechanical vibration, impact and strong magnetic field. The packing box shall be padded at least 20cm above the ground, and not be soaked. If the storage time is too long (more than 1 year), it shall be rechecked by professionals before use.