EN
AR
FR
DE
HI
JA
KO
PL
PT
RU
ES
TL
ID
VI
TH
FA
200W LED Display Driver/Power Supply 5V/4.5/4.2V Optional with Triple Proof PCB
It can be applied to Led display, LED indicator light and other Led display fields. This product is ultra-thin design, with a height of only 30mm, and can adapt to a variety of box size requirements. Super high efficiency, compact shell design and good heat dissipation ensure the long-term stable work.
Place of Origin: CHINA Brand Name: Hangtepower Model Number: LH-200-5P
Detailed introduction
Description
It can be applied to Led display, LED indicator light and other Led display fields. This product is ultra-thin design, with a height of only 30mm, and can adapt to a variety of box size requirements. Super high efficiency, compact shell design and good heat dissipation ensure the long-term stable work.
- 1. Three years of research and development and 20, 000 hours of production evaluation in their own factory to achieve the stable and reliable quality performance.
- 2. With the latest technology and production process, it is the most advanced honeycomb equipment with the highest production capacity and the lowest loss in the world. The maximum cutting speed can reach 700 cuts/min.
- 3. Fully computerized control. Improve equipment control details high automation, more convenient operation.
- 4. It’s dust-free, tasteless, pollution-free, and complies with international environmental protection requirements
Specifications
| Model | LH-200- 5P | ||||||
| Input | Input voltage | 176～264VAC | |||||
| Input current | 240VAC/3A | ||||||
| Efficiency | ≥87% | ||||||
| Frequency range | 47～63HZ | ||||||
| Leakage current | <1.5mA/230VAC | ||||||
| Inrush current | Cold start, 50A/230VAC | ||||||
| PFC | - | ||||||
| Output | DC voltage | 5V | |||||
| Rated current | 40A | ||||||
| Rated power | 200W | ||||||
| Voltage ADJ. range | -- | ||||||
| Ripple & Noise | ＜250mVp-p | ||||||
| Setup, rise | 2500ms，50ms/230VAC at full load | ||||||
| hold up time | 5ms/230VAC at full load | ||||||
| Line regulation | ±0.5% | ||||||
| Load regulation | ±2.0% | ||||||
| Voltage tolerance | ±3.0% | ||||||
| EMC | Interrupt, fall | Compliance to: EN6100-4-11/C | |||||
| Vibration | 10~500Hz, 2G 10min. /1 cycle, 6 cycle each X, Y, Z axes | ||||||
| Shock | 20G/11mS pulse, 3 times at each X, Y, Z axes | ||||||
| Safety | Safety standard | Compliance to: GB4943/UL60950 | |||||
| Withstand voltage | I/P-O/P: 3.0KVac/10mA; I/P-CASE: 1.5KVac/10mA; O/P-CASE: 0.5KVAC/10mA 1min for | ||||||
| Isolation resistance | I/P-O/P: 100M ohms; I/P-Case: 100M ohms; O/P-Case: 100M ohms | ||||||
| Protection | Over voltage | / | |||||
| Over load | 110～150% rated Hiccup mode, auto-recovery | ||||||
| Over current | 48-76A error eliminated, auto-recovery | ||||||
| Short circuit | Hiccup mode, auto-recovery | ||||||
| Environment | Working Temp&humidity | -40~70℃ 20%~95%RH non-condensing （Refer to Derating Curve） | |||||
| Storage Temp&humidity | -40℃~85℃; 10%~95%RH non-condensing | ||||||
| Vibration | 10~500Hz, 2G，10min/1 cycle, 60min. each along X, Y, Z axes | ||||||
| Impact | 20G，last 11mS，3 impacts along X, y and Z axes | ||||||
| Altitude | the ambient temperature derating of 0.6 ℃/100m for operating altitude higher | ||||||
| Reliability | MTBF | Under 25℃: 100000Hrs, MIL-217 Method 2 | |||||
| Others | Size | 190*82*30 mm（L*W*H） | |||||
| Packing | 0.34Kg/pc, 40pcs/ctn，14.5KG/ctn | ||||||
| Cold mode | ☑free air convection □with fan | ||||||
| More options | □ PCB double side conformal coating □ Terminal with cover □ low temp start | ||||||
| | *In order to extend the service life, it is recommended to leave 30% more allowance when loading. For example, if the equipment needs 100W power, please choose the power supply over 130W. *Ripple&noise are measured at 20MHz of bandwidth by using a 12’’ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. *All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. *the auxiliary heat dissipation of aluminum plate with an area of 300 * 300 * 5mm must be used when full load working. *The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. All our EMC tests are carried out by mounting samples on metal plates. | ||||||
Applications
LED display、LED indicator light、LED TV wall and so on
Quick Detail
- New components, long life, high reliability
- Adopting synchronous rectification technology and dual-tube positive excitation scheme, high
efficiency and low heat generation. - PCB boards are treated with triple-proof paint and are protected from salt spray, dust and humidity.
- Fully automated production, high consistency and reliability.
- Over-current and short-circuit protection
● Derating curve:
● Static characteristic curve:
